Boron Removal by Electrocoagulation Using Full Factorial ...
full factorial design. At optimal conditions, boron removal from synthetic aqueous solutions containing initial boron concentrations of 5 and 50 mg/L reached 81% and 79%, respectively. Applied to boron removal from seawater samples, EC reduces boron con- centration to less to 2.4 mg/L with excessive energy consumption under optimal parameters.
Boron Removal by Electrocoagulation Using Full Factorial ...
At optimal conditions, boron removal from synthetic aqueous solutions containing initial boron concentrations of 5 and 50 mg/L reached 81% and 79%, respectively. Applied to boron removal from seawater samples, EC reduces boron concentration to less to 2.4 mg/L with excessive energy consumption under optimal parameters.
Boron adsorption by clinoptilolite using factorial design ...
Boron removal increased with increasing pH and adsorbent dosage, but decreased with increasing temperature. The optimum conditions were found as pH = 7, adsorbent dosage = 1 g/25 mL solution, and temperature = 25°C by using factorial design.
Boron removal by coagulation using Al(OH)3 and factorial ...
Boron removal by coagulation using Al(OH)3 and factorial optimization of data for boron mine wastewater In this study, boron removal from synthetic solutions and boron mine wastewater by coagulation method using in-situ formed Al(OH)3 from AlCl3 salt was investigated. The experimental parameter for synthetic solution was solution pH.
Full Factorial Design of Experiments for Boron Removal ...
In this study the optimization of boron removal from the boron mine wastewater using Purolite S 108 resin was investigated by means of a 2 3 full factorial experimental design. Experiments were carried out in batch mode as a function of pH, temperature and resin-to-solution ratio. The low (1)
Boron adsorption by clinoptilolite using factorial design ...
Abstract In this article, boron removal from aqueous solutions by batch adsorption was investigated and 23 full factorial design was applied. Three parameters affected the performance and two level...
Full factorial design of experiments for boron removal by ...
Full factorial design of experiments for boron removal by iron hydroxide from colemanite mine wastewater In this study, iron hydroxide was in-situ generated from iron chloride in the jar test reactors and used for boron removal from both synthetic solutions and colemanite mine wastewater.
Boron removal from aqueous solutions by batch adsorption ...
Mar 01, 2008 · Boron removal from aqueous solutions by batch adsorption onto cerium oxide using full factorial design Presented at the conference on Desalination and the Environment. Sponsored by the European Desalination Society and Center for Research and Technology Hellas (CERTH), Sani Resort, Halkidiki, Greece, April 22–25, 2007.
Removal of boron from aqueous solution by adsorption on ...
Nov 02, 2006 · In this study, adsorption and desorption of boron from aqueous solution onto Pural and Siral 30 was investigated. Two level factorial designs were used to determine the effects of the parameters and their interactions on boron removal by batch adsorption method. It will be also determined which one of the most important factor affecting boron is.
Experimental Design Methodology Applied to Boron Removal ...
Boron removal by these treatments is not always easy to apply in situ, due to their performance, and their cost. Adsorption is an alternative method in the treatment of waters based on the property of different materials to bind and concentrate the boron from aqueous solutions.
Boron Removal by Electrocoagulation Using Full Factorial ...
optimal conditions, boron removal from synthetic aqueous solu tions containing initial boron concentrations of 5 and 50 mg/L reached 81% and 79%, respectively. Applied to boron removal from...
Optimization of boron removal from water by ...
Obtained results show that the optimal conditions for the removal of boron are: a pH equal to 10, a flow rate of 10 L h −1, a ratio between the concentration of sulfates and that of boron equal to 2 and a reaction time of ED of 25 minutes. A desirability value of 1 corresponds …
Adsorption of Boron from Aqueous Solutions by Sepiolite ...
the boron removal, a two level factorial design of experiments was adopted. The variables studied are adsorbent type (NAWS.AWS), pH of solution (5.75,10) and temperature (20,40°C). The number of experiments required for understanding all the effects is given by ak=23=8, where a is the number of levels and k is the number of factors. The two
Boron in Produced Water: Challenges and Improvements: A ...
Reverse Osmosis (RO): Reverse osmosis is a major technology in wastewater treatment and have been used in removing different water contaminants. Newly produced seawater reverse osmosis membranes are claimed to have boron removal efficiency of 91-93% (Oo and Song, 2009). Conventional RO membranes reject boron to a level of about 40-78%.
Removal of boron from aqueous solution by adsorption on Al ...
Journal of Hazardous Materials B138 (2006) 60–66 Removal of boron from aqueous solution by adsorption on Al 2O 3 based materials using full factorial design
Boron Removal by Electrocoagulation Using Full Factorial ...
Boron Removal by Electrocoagulation Using Full Factorial Design
Removal of boron from aqueous solution using magnetic ...
Boron removal capacity of multi-walled carbon nanotubes (MWCNTs) modified with tartaric acid was investigated in this study. Modification of MWCNTs with tartaric acid was confirmed by Boehm surface chemistry method and fourier transform infra-red (FT-IR) spectroscopy.
Full factorial design of experiments for boron removal ...
(PDF) Full factorial design of experiments for boron removal from Colemanite mine wastewater using Purolite S 108 resin | Baybars Ali Fil - Academia.edu Boron pollution has a vital importance in Bigadiç boron mine in Turkey because the wastewaters of the mine are stored in a soil dam that threats the underground water quality.
Removal of boron from aqueous solution by adsorption on Al ...
Removal of boron from aqueous solution by adsorption on Al"2O"3 based materials using full factorial design [An article from: Journal of Hazardous Materials] [Y. Seki, S. Seyhan, M. Yurdakoc] on Amazon.com. *FREE* shipping on qualifying offers.